AK Quick-Cure Sealcoat Superdryer

No more waiting around for hours on a cloudy day waiting for asphalt sealcoat to dry so you can drive on it. Our new quick-cure sealer accelerator will get traffic moving again fast!

Due to risk of product freezing this item will only be shipping Mid-April. If you would like to inquire about our heated shipping service, please contact our friendly staff. (Charges for heated shipping may apply)

AK's Sealcoat Superdryer slashes wait time for driving on freshly sealcoated surfaces. No sun? No problem! With AK's Sealcoat Superdryer, you can help sealer dry and cure in the shade much more quickly than without this sealcoat additive.

Because it works so quickly, sealcoat contractors add weeks to the beginning and end of their season, allowing them to work before most others would even consider getting started! You'll be more profitable and have a longer season!

What's more, the fast-curing action means you can do night sealcoating in busy malls, stores, and fast-food restaurants because you don't need the sun to help dry the product.

Other products are latex-based and as a result they can clog your strainer. What's more, they can cause a fake hard surface to appear on top of the sealcoat, trapping moisture underneath and actually extending the drying time of your asphalt surface!

AK's Sealcoat Superdryer resin-free product that helps suspend sand in sealer much longer than the competition. Your sand ends up on the asphalt surface and NOT in the bottom of your tank!

You'll get less clogging of your filter and spray tips, easier clean up and deeper, darker sealcoat finishes with AK's Sealcoat Superdryer. Forget sealcoat cracking and flaking - they're a thing of the past with this product.

• Shelf Life 1 to 2 years. 
• Do not freeze. 
• 1/2 gallon to 3/4 gallon per 100 gallons of raw sealer.

Material Data Safety Sheet

1. Product Information:
Emergency Phone: 877-602-5062

2. Composition, Information On Ingredients:
Component Formula Proprietary, Non-Hazardous

3. Physical Data
Boiling Point: 100*C
Appearance and Odor: Blue liquid, odorless
pH level: 3.5-4

4. Fire and Explosion Hazard Data
Flash point (test method): N/A - not flammable
Flammable limits in air, percent by volume: Lower: N/A Upper N/A

5. Health Hazard Data
Warning! Causes Irritation to Skin, Eyes, and Respiratory Tract. May Be Harmful if Swallowed.
Inhalation: Causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath.
Ingestion: Causes irritation to the gastrointestinal tract. Symptoms may include nausea, vomiting and diarrhea. It presents little toxicity unless large amounts are ingested, in which case vomiting and diarrhea are likely.
Skin Contact: Causes irritation to skin. Symptoms include redness, itching, and pain.
Eye Contact: Causes irritation, redness and pain.
Chronic Exposure: No information found.
Aggravation of Pre-Existing Conditions: No information found.

6. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, gif artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
Medical Conditions Aggravated by Exposure: Persons with skin disorders may experience aggravation of the condition.

7. Reactivity Data
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Oxides of sulfur, oxides of nitrogen, and oxides of carbon.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Sodium hypochlorite, potassium plus ammonium nitrate, potassium chlorate, potassium nitrite, and sodium-potassium powder plus ammonium nitrate, and other strong oxidizers.
Conditions to avoid; Heat, incompatibles.

8. Spill or Leak Procedures
Spill: Wear appropriate personal protective equipment as specified in Section 0. Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert material such as vermiculite, dry sand or earth, and place in a chemical waste container. Do not flush to sewer.
Waste Disposal Method: Dispose of in an approved landfill. Observe local, state and federal regulations.

9. Special Protection Information
Airborne Exposure Limits: None Established.
Ventilation System: A system of local or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece postive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protec workers in an oxygen-deficient atmosphere.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safey goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

10. Special Precautions and Other Information
Handling & Storage: Store in a place where freeze of product cannot occur. Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Observe all warnings and precautions listed for product.
Other precautions: Practice good hygiene; wash hands and face after use and prior to eating and drinking.