AK10 Gallon Melter Applicator - Canadian

Regular Price: $1,400.00

Special Price: $979.00

You Save:Bundle Saves: $421.00

Add to Cart
Or

In Stock.

Free Shipping saves you $210.00.

The Melter Applicator is designed for residential or commercial parking lot crack sealing.

  • AK10 Gallon Melter Applicator - Canadian

Melter Applicator - Canadian

More Views

  • Melter Applicator - Canadian
  • Melter Applicator Front - Canadian

New! The AK10 now features a hand agitator at the top which mixes the crack filler in the kettle so it melts faster. $125 value – free!

1 Year Warranty!High-quality residential or commercial parking lot crack sealing machine.

Compare our different pour pots.


Overview

10 Gallon Melter Applicator

Fill twenty five feet worth of cracks in just 15 seconds.
That's $10 in profit in just 15 seconds.

The AK10 gallon applicator is the best hot pour crack filling system on the market. If you are looking to fill cracks on residential and commercial asphalt surfaces it is the right hot pour crack filling system for you.

Every sealcoating company should own an AK Crack Sealing applicator as you can charge up to $1 per linear foot for hot pour machine crack filling.

Every large property owner should also own this unit to make sure that the cracks are filled and sealed to prevent asphalt deterioration.

You can do between $500 and $1000 in profits, daily with an AK crack filling system. One of these units should be on each of your trucks as it is a wonderful up sell when you are on a sealcoating job.

The difference is quality.  Compare the AK10 with other less expensive products on the market and you'll quickly see the difference:  quality.  Our crack melter is a Canadian machine, made by Canadians with Canadian parts - and that means reliability and durability aimed right at the kinds of jobs you're doing.  Don't settle for cheap alternatives - get the best value for your money.

Assemble it in just 30 minutes - good construction makes it a breeze to put together!

The AK Crack Melter Applicator is designed to apply a hot pour rubberized crack filler that expands in the crack when drying and setting. You may have seen a similar product being applied on the roads and highways by road crews.

It sure doesn't hurt to offer this crack filling service to your clients. We usually do 1 or 2 cracks for free and then ask the client if they would like us to do the rest of the cracks. Consider the free crack filling on a couple cracks the demo and when the client actually see the system in action they can't say "NO" and will happily spend an additional $50 to $100 in crack filling on their driveway.

It's wonderful being able to offer your clients a proper crackfiller solution that will get the job done right. Nothing better than hot pour crack filler and you can now offer it when purchasing this system.

As you can see in the photo below, the system fills the cracks with hot pour crackfill and then has a scraper that smooths the asphalt crack filler out on the asphalt surface.

The AK10 gallon crack filler system is mounted on steel wheels and comes equipped with a handle control release valve, steel finish plate for striking off the sealant in uniform width, a burner that is propane fired with hose, regulator for propane and heat flow and temperature gauge.

The system is very easy to maneuver for following random cracks that are up to one inch thick. This system is much faster than using hand held pour pots and does a way better job compared to standard liquid acrylic crackfills that you can purchase at local hardware stores.

If you're located in the USA, please click here.

Features

  • Melts cubes of rubber crackfill and applies it into asphalt cracks
  • No cleaning required
  • Temperature gauge
  • High Power Burner Torch
  • AK10 holds 10 gallons of crackfill
  • Extremely easy to operate
  • 3 year warranty
  • Comes with the Torch Burner and hosing (Propane tank not included).
  • Capable of melting and applying up to 700 pounds of hot pour crack filler per day which adds up to approximately 6300 Linear feet of 1/2 cracks.
  • Heats 40 pounds of Crackfill in under 7 minutes.
  • Direct Fire.
  • One man operation.
  • Everything is assembled and ready to do quality crack sealing. (Propane bottle not included)
  • Length: 48" x Width: 24"x Height: 36"
  • Weight: 121 Lbs.
  • 6 Month Guarantee!

 

See the AK10 Manual Here
Get the complete AK10 Training Manual
Read the AK10 Gallon Melter Applicator Safety Instructions

Photos & Videos





Write Your Own Review

You're reviewing: AK10 Gallon Melter Applicator - Canadian

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value
Info Message