Home /
36 Boxes of Hot Rubber Crack Filler (Skid)

36 Boxes of Hot Rubber Crack Filler (Skid)

Our Price (USD):

$1,950.00

$300.00

Availability: In stock

Qty:

Thirty six 50 pound boxes of commercial grade hot pour rubberized asphalt crack filler - save over $600 when buying a complete skid instead of one box at a time. Free Shipping and No Sales Tax!

36 boxes of driveway crack filler

More Views

Thirty six 50-lb boxes of hot pour rubberized asphalt crack filler - save over $600 when buying a full skid compared to 1 box of crackfiller at a time.

Overview

Asphalt Kingdom's Hot Rubberized Crack filler is used to seal cracks or joints in asphalt or concrete surfaces, which are up to 1" in width and up to 1/2" in depth. 3-4hr drying time.

Asphalt Kingdom's Crack filler must be heated in a kettle or hot crack fill applicator melter before use. This material must be applied into cracks that are free from all foreign matter and debris. This material can be poured directly from the melter or pour pot into the crack and should yield approximately a rate of 300 to 400 linear feet per 50 pound box of crack filler.

Asphalt Kingdom Hot Pour CrackFiller:

300 to 400 linear feet of coverage per 50 lbs box of crackfill.
100% Commercial grade rubberized asphalt crack sealer designed to fill cracks and seal out water and ice
Lasts and looks beautiful for 3 to 4 years.
Dries in 2 hours.
Ships to your door immediately in 4 to 7 business days.
5 year Shelf Life.
Non Flammable below 400 degrees F.

Crack Filler Calculator Let us help you determine what you need.

Price:

Quantity:

Add to Cart

Specifications

Hot Pour Crackfiller Specifications:

Section One: Product Identification

Product Name: AK Hot Melt Crack and Joint Sealants	Note: This MSDS complies with requirements of the Hazardous Communication Standard, OSHA 29 CFR 1910.1200
Chemical Name, Family, and Synonyms:Rubber Modified Asphalt Materials	Hazard Classification: Health =1 Fire =1 Reactivity=0
Formula: Mixture contains asphalt cement rubbers, extenders, and reinforcing fillers	Hazard Classification: Health =1 Fire =1 Reactivity=0
DOT Shipping Classification: Non Haz Mat	Emergency Assistance: 419-621-1966

Section Two : Hazardous Ingredients / Identity Information

Hazardous Components (Specific Chemical Identity / Common Name)	AGGIH TLV
Asphalt (CAS 8052-42-4)	5mg/m3

Section Three: Physical Chemical Characteristics

Boiling Point: Greater than 600*F	Specific Gravity: (H20=1) 1.0-1.3
Vapor Pressure: (mm Hg) Not Applicable	Melting Point: (ASTM-D36, Ring and Ball Softening Point) 160-220*F
Solubility in Water: Negligible	Appearance and Odor: Black adhesive, odor of petroleum Solid at 77F / liquid above 275F

Section Four: Fire and Explosive

Flash Point: (Method Used) C.O.C (ASTM-D92) 424*F Minimum	Special Fire Procedures: Use of self-controlled breathing apparatus in enclosed areas and full body protection gear including face shield, trench coat, gloves, and rubber boots. Concentrated vapors from combustion should not be breathed.
Flammable Limits: N/A	Unusual Fire and Explosion Hazard: Material will not burn unless pre-heated. Black, dense, hazy smoke forms during burning. Keep sparks away from concentrated fumes.
Extinguishing Media: Co2, Dry Chemical, Foam

Section Five: Reactivity Data

Stability: Stable

Incompatibility: Strong oxidizing materials

Hazardous Polymerization: Will Not Occur

Conditions to Avoid: Do not expose fumes from heated product to sources of ignition.

Hazardous Decomposition or Byproducts: Combustion may produce various oxides of carbon (CO, CO₂, etc...)

Conditions to Avoid: None Known

Section Six: Health and Hazard Data

Routes of Entry:

Inhalation: Yes, Fumes
Skin: Yes, Hot Material
Ingestion: Rare

Carcinogenicity:

NTP: No
IARC Monographs: No
OSHA Regulated: No

Health Hazards (Acute/Chronic): High Fume Concentrations may irritate eyes and respiratory tract. Hot product may cause minor to severe burns when contacts skin.

Signs and Symptoms of Exposure:

Inhalation-Irritation: nausea, dizziness, headaches
Skin Contact with Solid Product: No Irritation
Skin Contact with Hot Pour: Burns

Emergency and First Aid Procedures:

Inhalation: Remove to fresh air, assist breathing if necessary
Burns: Cool with water, remove with mineral oil/soap/water
Get medical help for severe burns

Medical Conditions:
Respiratory problems may be aggravated by petroleum fumes

Section Seven: Precautions for Safe Handling and Use

Steps to be taken in case material is released or spilled: Permit material to cool to a solid. Cover with earth to reduce adhesiveness. Place in appropriate containers to transport to a waste disposal site.

Waste Disposal Method: Bury collected material in approved landfill or burn in approved incinerator; follow local, state and federal regulations.

Precautions taken in Handling & Storing: Keep pallets intact in storage. Packages of unused material present no known health/safety hazards.

Other Precautions: Be aware of burn hazards which are possible if skin contact occurs during use. Avoid inhalation of excessive amounts of fumes. Practice good personal hygiene.

Section Eight: Control Measures

Respiratory Protect: For high fume concentration, NIOSH respirator with organic and mist filter

Ventilation: Local Exhaust to keep fumes below TLV, Mechanical and Specialty Ventilation not generally required

Protective Gloves: To protect hands and arms from hot material

Eye Protection: Safety Goggles

Other Protective Clothing/Equipment: To prevent skin contact with hot material

Work/Hygienic Practices: Use good personal hygiene. Wash hands and exposed skin with soap and water.

AK-10-gallon-applicator

Customer Reviews

All Questions Answered Review by Randy Welch

Value
Quality
Price

No questions. All have been answered regarding the product we bought. Response was immediate and concise. Great job and great quality.

Worked great Review by Ryan Vincent

Value
Quality
Price

Filled all cracks in our parking lot and bought the AK10 crack machine. Did ourself and happy with result.

Crack Filler Review by Andy Malkey

Price
Value
Quality

Great stuff. Very Durable and lasts a long time.

Write Your Own Review

You're reviewing: 36 Boxes of Hot Rubber Crack Filler (Skid)

How do you rate this product? *

	1 star	2 stars	3 stars	4 stars	5 stars
Price
Value
Quality

*Nickname
*Summary of Your Review
*Review

Info Message

How Long is the crack?
How Deep is the crack?
How Wide is the crack?
Number of Linear Ft Required:
Number of 50lbs Boxes Required:
Material Cost: